Fall Sale

eSUN PLA+ Filament, Cool White, 1.75mm, 1kg / 2.2lb

actual product appearance may vary eSUN PLA+ Filament, Cool White, 1.75mm, 1kg / 2.2lb
Color:

$22.99

buy 2+ for $21.85 ea. (save 5%)

  • ✓ IN STOCK
  • 🔒 256-bit SSL encryption

eSUN printing filament is designed to work with a majority of 3D printers.

eSUN PLA+ filaments features:
  • Several times stronger than standard PLA
  • Superb layer bonding
  • High rigidity
  • Better glossiness
  • Smoother finish
  • No cracking or brittle problems

PLA PLA+ print temperature is about 20°C higher than regular PLA. Extrusion temperature range: 205°C - 225°C. PLA+ has a low shrinkage rate and sticks very well both to bed and layer to layer. PLA+ is a biological material, extracted and purified from corn grain, eco-friendly, odorless, and harmless to human.

  • Color: Cool White
  • Material: PLA+
  • Thickness: 1.75mm
  • Weight: 1kg/2.2lb per roll
  • Spool Dimensions diameter - 8", width - 2.50", hub hole diameter - 2.05", inner circle diameter - 3.5"

Product is vacuum packed with a manual. It is not easy to absorb moisture and is ok for long-term storage. It absorbs slower and less moisture than standard PLA.



REVIEWS:
Lexy
They have a large variety of products to choose from. The description clearly and accurately describes what the product is intended for. The prices are very low in comparison to many other places. The shipping rates are stated right in the beginning and clearly so their is no confusion or surprises.
Bobbi
I would definitely recommend Refill Bay to family & friends. Very affordable prices & reasonable shipping prices.
Jamie
Easy site to use, filament available when not on other sites, discount, reasonable prices.
AmbyyMacc
I was recommended to this site by a friend, I was having such a hard time finding the proper equipment for my DTG printer. Once I found Refill Bay all my worries were relieved! Great site, easily accessible. Highly recommend.
Mikey
Ever since Lexmark stopped selling ink for the 901 Pinnacle, I found RefillBay.com. I intend to purchase my ink from them.
Lou
I stumbled upon this website when googling a cheaper alternative for my HP printer. I was pleasantly surprised with my service in Refill Bay. It was super affordable and it was super easy to purchase. I'll definitely be a customer again.

Compatible Printers:

· Eventorbot
· Makemendel Ditto 3D
· MakerBot
· MAX Airwolf 3D Series 1
· Mendels
· Portabee
· POWERWASP
· Printrbot
· Printrbot LC
· RigidBot 3D
· Robo 3D
· Romscraj
· Rostock
· Solidoodle
· Sumpod
· Up!

Frequently Asked Questions:

What's the difference between ABS and PLA?

Acrylonitrile Butadiene Styrene (ABS) is lightweight and it has a lower coefficient of friction. That makes it preferred material for small parts, compared to PLA. ABS has to be extruded at a higher temperature. Its glass transition temperature is around 105°C/220F. ABS is amorphous and therefore has no true melting point, however 230°C/445F is the standard for 3D printing. Most LEGO is made of ABS.

Polylactic acid (PLA) is a bio-degradable polymer derived from corn starch. It is melts at a lower temperature around 180°C/355F, and a glass transition temperature around 60°C/140F. It does exhibit higher friction which can make it difficult to extrude. PLA will flow more easily than ABS at the same temperatures and usually more glossy.