bison3D PLA Filament, Glow in the Dark, Blue, 1.75mm, 1kg / 2.2lb

actual product appearance may vary bison3D PLA Filament, Glow in the Dark, Blue, 1.75mm, 1kg / 2.2lb
Color:

$22.55

buy 2+ for $21.45 ea. (save 5%)

  • ✓ IN STOCK
  • 🔒 256-bit SSL encryption

bison3D printing filament is designed to work with a majority of 3D printers.

bison3D PLA filaments features:
  • Easily molded
  • Safe to recycle
  • Tough and impact resistant
  • Easy to modify and paint post-print
  • Easy to glue or soften with products like acetone, which also gives the finished object a more "polished" look

PLA is melts at a temperature around 180°C/356F, and a glass transition temperature around 60°C/140F.

  • Color: Glow in the Dark, Blue
  • Material: PLA - Polylactic Acid or Polylactide
  • Thickness: 1.75mm
  • Weight: 1kg/2.2lb per roll

PROP 65 WARNING: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
www.P65Warnings.ca.gov


REVIEWS:
XxCatmaNxX
I was so happy to find my product available on RefillBay. Nobody else had it.
Mule
Refill Bay has very good prices on remanufactured cartridges. It is so easy to pick the product from the outstanding selection on their website, and before you know it the product is at your door. Way too easy Refill Bay! Thanks
Sal
Glad I found this wonderful site. Stop paying retail prices and start buying discounted prices. This is my second time buying from this site and plan on returning back again.
Mark-Y-Mark
It is always easy to locate toner for my printer model. The average print capacity in pages of each color toner is listed. The cost is a lot less than the printer manufacturer charges and the performance is perfect.
James F.
Refill Bay has the best products at the best prices. This is my 3rd time ordering from them and I always get my products fast!!!
Beth H.
RefillBay's selection of inks is second-to-none compared with each and every other website I checked. I was pleasantly surprised... wait - no - I was "thrilled" that their price was significantly lower than others.

Compatible Printers:

· Eventorbot
· Makemendel Ditto 3D
· MakerBot
· MAX Airwolf 3D Series 1
· Mendels
· Portabee
· POWERWASP
· Printrbot
· Printrbot LC
· RigidBot 3D
· Robo 3D
· Romscraj
· Rostock
· Solidoodle
· Sumpod
· Up!

Frequently Asked Questions:

What's the difference between ABS and PLA?

Acrylonitrile Butadiene Styrene (ABS) is lightweight and it has a lower coefficient of friction. That makes it preferred material for small parts, compared to PLA. ABS has to be extruded at a higher temperature. Its glass transition temperature is around 105°C/220F. ABS is amorphous and therefore has no true melting point, however 230°C/445F is the standard for 3D printing. Most LEGO is made of ABS.

Polylactic acid (PLA) is a bio-degradable polymer derived from corn starch. It is melts at a lower temperature around 180°C/355F, and a glass transition temperature around 60°C/140F. It does exhibit higher friction which can make it difficult to extrude. PLA will flow more easily than ABS at the same temperatures and usually more glossy.